Labthink Instruments Co Limited

PTI is the leading manufacturer of non-destructive package inspection technologies for the pharmaceutical, medical device and food industries. PTI’s airborne ultrasound technology is highly effective for seal quality testing and analysis. VeriPac and Seal-Scan technologies offer non-destructive inspection solutions for flexible package quality testing. Polymer and plastics chemical testing supporting the entire lifecycle including chemicals analysis of polymer raw materials, resins, plastics and composites. C203H Oxygen TransmissionRate Test System is based on Coulometric oxygen analysis sensor andequal pressure test metod, and is conforming to ASTM D 3985 and otherstandards. It provides high-precision and high-efficiency oxygen permeabilitytests for high and medium gas barrier materials. We provide our industry partners with service and support for their quality control requirements, production assessments, and procurement decisions. It is of utmost importance to ensure that correct packaging materials are used for drug product. This test is used only with containers that have been exposed to sulphur dioxide fumes under controlled humidity conditions. The principle involved in the water attack test is to determine whether the alkali leached form the surface of a container is within the specified limits or not.

seal strength testing

Confidently test samples to the composition and performance standards you require. What’s more, a range of complementary services helps to keep your laboratory up and running smoothly. The dart impact test is the most common testing procedure utilized for evaluating impact strength. A weighted round-headed dart is released onto a tightly clamped sheet of film, and the sample is examined for failures visually. Since dart impact is not evaluated in any film direction, it is sensitive to orientation effects in both directions. Measure the sliding resistance of sheet materials including plastic film, packaging film laminates, paper, paperboard. Tear testing measures the force required to continue the tearing of an initial cut in sheet materials. Models and weights are available to test material with a variety of strengths.

Several types of accelerated aging of packaging and materials can be accomplished in a laboratory. We are the lab solution and testing service provider for the food, pharmaceutical, packaging, printing industries, research institution and college with qualified instruments & service. The machines are running well in over 30,000 laboratories to guarantee the highest quality and service. In this paper, by simulating the friction process of the packaging material itself when the film roll is drawn, the friction coefficient of the inner surface of the rice cake packaging film to the outer surface is detected. Both load compression and load containment are very highly influenced by the film tension setting. Higher F2 settings results in higher compression and also greater containment force. Offsetting this relationship results in a loss in propagated tear resistance for some film formulations.

But how the manufacturers can ensure that it can also deliver that level of strength and is beneficial to use. In this post, we will take in more about bursting strength tester used for quality assessment of paper packs. It is composed only for the ideal estimation of dissolve stream rate of liquid plastics or granules. The Plastic soften stream record is ascertained by playing out a manual/programmed test methodology on a testing instrument to check the dissolve volume rate of the stream of plastic granules . The system went through a bite the dust having a specific estimation in breadth and length. It is done under a particular weight and temperature with the perfect position of a cylinder in a tube shaped compartment inside a warmed metallic barrel. Top-load testing provides a standard method of obtaining data to set acceptance or rejection specifications for quality control, research and development and special designs.

The HDPE are used for packaging materials because they are very thick in consistency and have better strength and can be used for making flexible products that can be flexed back if exerted a force on it. It is recyclable and can be used again and again for manufacturing of new products. COF-P01 Inclined Surface Coefficient of Friction Tester can be used for coefficient of friction tests for paper, cardboard, plastic films, sheets, and conveyor belt and etc. By the smoothness measurement, it can be used to adjust the open easiness of pouches, packaging speed of packing machine and other quality indexes so as to meet the application demands. The testing of packaging materials is almost requirement for any pharmaceutical industry. The material of a package affects quality, stability and efficacy of drug product. Thecost of material of a package should be as low as possible without compromising the quality of product. It should pass the specifications of tests before it reached the local markets and made available to the consumers of product. The type of test followed should be according to requirements of regulatory agencies. The most common applications of paper, paperboard, and cardboard are in blister lidding stock and in over-the-counter outer packaging.

Not only can these defects be deleterious to the container, but they can also compromise the quality of the pharmaceutical. TM Electronics provides smart, fast, reliable package testers for package burst testing, creep-to-failure testing and pressure decay leak testing for medical, pharmaceutical or the food packaging industries. A variety of standard and custom package testing automatice instruments are available to meet unique package testing needs. Plastic packaging bags used for packaging of different types of small and big products. The main objective of the packaging is to provide better appearance to the products and ensure the best level of safety of the products. For this, it is essential that the packaging bags are of best quality and have enough strength so that they could sustain during the harsh conditions of storage and transportation. The manufacturers of bags must use the best plastic packaging bags testing instruments for ensuring the best quality of the products.

Employees standing along the line also pick out problematic materials before they reach equipment. What wasn’t anticipated at that time was the impact that increasing consumer recycling ease would have on the addition of flexible plastic packaging into the recycling stream. J.P. Mascaro & Sons, a solid waste and recycling company in Pennsylvania, is testing additional equipment this year that would allow its MRF in Birdsboro, near Reading, to readily accept flexible packaging. We understand your requirement perfectly and aim to give you top notch solution. Your manufacturing unit can produce the quality work to satisfy your customers. We have developed with the changing trend have brought the latest design for each machinery. No matter of your industry, you can ensure that your customers get the paramount quality products. Our machines also help you reduce your production cost as it consume less electricity and give you better results.

As film tension is increased during the testing cycles, the corner plate will eventually puncture the film . High performance films will accept this puncture but the initial hole initiated in the film will not grow or propagate. As the film tension increases during subsequent test cycles, the hole will increase in size, eventually leading to our proscribed failure level (approximately 4″ tear) or actual breaking of the film web. This is the test we use to determine the maximum film tension any individual film can withstand at a given prestretch level and turntable speed. In turn, this allows us to predict the maximum load containment available from a given film. This is essential when obtaining accurate results while performing the ASTM D638 method since the thickness of the sample will change. Likewise, the machines offer customization options which include adding more security measures, as well as an option that allows for the process to be automated. Automated systems take care of measuring the sample, loading it, testing it and removing it.

Pharmaceutical packaging is the means of providing protection, presentation, identification, information and convenience to encourage compliance with a course of therapy. The commonly used packaging materials are Container, Closure, Carton or Outer and Box. There are various tests for determination of quality, integrity and compatibility of packaging materials. The specification and requirement of quality testing depends on type of pharmaceutical materials used. Containers are tested by many methods of which commonly used test for glass are Crushed glass test, Whole-Container test, Chemical resistance of test, Water Attack Test etc. Closure materials are tested by Transparency test Penetrability Fragmentation test Self seal ability test, Extractive test etc. The requirement of packaging material testing is set according to specification of regulatory agencies like WHO GMP, USFDA and ICH guidelines. Paper products are used in many different industries such as packaging industries, printing industries.

CMTL strives to provide a high level of technical support and quality service to each of our customers because when you succeed we succeed. Cambridge Materials Testing Limited is an independent laboratory servicing a broad range of clients. The company’s operations include two facilities in southern Ontario located in Cambridge and Mississauga, Ontario. We believe that independant third party testing is a cost effective way to protect and limit liability for all parties involved in supplying any manufactured product or production process. The packaging operation can involve many complex operations, all of which require careful control if product quality and security are to be maintained. The packaging operation means either the filling and packaging of non sterile products or the packaging stage of filled sterile products. The main specifications requirements are the component drawing, artwork and the quality control testing and standards. a) Water vapour permeability- the water vapour permeability of the pack containing the product is required. This is necessary because although the bottles will comply with the water vapour permeability test described in USP, permeation through the bottle wall will depend on wheather the product has a high or low affinity for the water. The test split into two parts to enable the maximum amount of information to be obtained and hence possibly eliminating the necessity to perform further time consuming experiments.

This enables us to simulate characteristics of different types of loads we encounter. Turntable speed can be varied from 0 to 42 rpm with the capability of adjusting that speed while the machine is in motion. This allows some degree of simulation of high speed automatic machine conditions. When it comes to stretch film applications, the first thing our team does is perform an audit of the current environment. Inventory Management Rely on Atlantic for inventory control to free up production floor space and manage cash flow. PPE & Sanitizing Wipes PPE products including face masks and gowns to help your company operate safely. Atlantic’s engineering and service teams are an incredible source of value for your overall packaging operation. Design & Automation Complete packaging line integration to meet your demands for speed, accuracy and performance. Engineering & ServiceTechnical Service Preventative maintenance and repairs for your packaging equipment with our in-house technicians. Atlantic’s patented programs and high level of expertise translate directly to value and performance for our customers.

Our goal is to find the right product or wrap pattern to match a customer’s application. We’re dedicated to studying and testing the properties of all types of film used in packaging applications. One section of the lab is devoted only tostretch filmwhile the remainder is devoted to the testing of polyethylene film, bags, and sheeting, includingshrink wrap. Overall, the Film Lab represents a tremendous source of value and potential for our customers. We test stretch films at varied prestretch levels, measuring puncture resistance, tear propagation, load compression and containment characteristics. Testing both the package’s materials and the package via transport simulation systems is useful in order to guarantee the safety of the product being transported and its properties, as well as to ensure the safety of the transport operator.

PTI’s inspection technologies are deterministic test methods that produce quantitative test result data. We specialize in offering the entire solution including test method development and equipment validation. Plastic testing instruments are widely used in industries all across the globe for testing various types of plastics that are used and manufactured in different industries. From a children toy to a space shuttle module, plastic products and components are used everywhere for various applications. Some of these applications are very crucial and need only the most accurate and bets quality parts and components to operate smoothly and successfully. The manufacturers need to be aware of the fact that if the quality of the plastics is not up to the level they can be easily led to failure. There are some extremely harsh working conditions where the plastic components are meant to be functioning. In this case, the bad quality of the plastic products can be very lethal and dangerous. Additionally, the integrity and quality of the plastic products is also important for smooth running of production line in the industries. This is the reason the manufacturing industries of plastic components need to use the best possible ways to check the quality of the products they are delivering to the customers.

The testing matrix would primarily depend on the composition of the packaging system. According to USP, “This testing generates a chemical safety assessment of a packaging system, based on risk-based testing.” However, if a material is well characterized and has data available, this step can be bypassed. Nelson Labs offers complete package testing and services in compliance with global regulatory requirements. Full packaging validations and Protective Packaging, SBS Package Design, Packaging Specifications and Failure Analysis. By providing your personal information e.g. name, postal/email address, telephone number enables Smithers to provide you with tailored information on our services. These might include purchased products such as market reports and conference places, testing or consulting services as well as digital resources such as whitepapers, webinar and brochures. Smithers is committed to ensuring the information we collect and use is appropriate for this purpose, and will process the information you provide in a manner compatible with the governing data protection laws. Smithers will endeavor to keep your information accurate and up-to-date, retaining it only for as long as required. Smithers offers chemical analysis laboratories in both the UK and US, offering a comprehensive range of extractables and leachables testing techniques.