Manufacturing process about stainless steel pipe

Fortunately, with the advent of development and technology, a variety of processes have emerged in the manufacture of stainless steel pipes and pipes in India. Today, stainless steel tubes and square steel tubing for sale are manufactured using a multi-strand tungsten inert gas continuous tube mill. No filler metal or forge welding processes are used in this technique.

Manufacturing process about stainless steel pipe

Stainless steel pipe manufacturing process:

Rolling and welding

First, the stainless steel belt is subjected to various quality checks and trimmed at the edges. They are then sent to the tube mill by Indian stainless steel tube manufacturers. The strip passes through a plurality of rollers in the desired size. In a tube mill, the strip gradually transforms into a tubular shape. The assembled welder is then welded to the decorative edge of the strip using a TIG welding process. The waste and internal welds are removed instantaneously through the Tibo machine. In this way, a rolled tube and a tube are formed.

Cleaning and heating stage

The rolled stainless steel pipe thus produced is cut to a desired length according to industrial requirements. These stainless steel tubes and tubes are then cleaned to remove dirt. In addition, these rolled tubes and tubes are heat treated to eliminate stresses that may occur due to welding and forming processes. The heat treatment is carried out on a continuous rolling hearth. The furnace is equipped with a temperature recorder and controller. After the heat treatment process, the SS tube and tube were straightened and pickled to remove scale from the surface.

Cold drawing process

In some cases, it may not be possible to obtain the required size directly from the mill. The cold process can then be used to achieve the desired size. In the cold drawing process, the tube or tube is coated with oxalic acid and a soap solution. This solution acts as a lubricant to reduce friction during cold drawing operations. In the cold drawing process, use a die plug to pull the tube or pipe onto the table.steel tubing manufacturer

Finishing process

The drawn tube or tube is then cleaned, heat treated, pickled and straightened. A computerized inkjet marking machine is used to mark the finished tube or tube. Prior to delivery to the stainless steel pipe exporter, the pipe or pipe is marked with material grade, size, heat and third party inspection mark. The stainless steel tubes or tubes thus produced will undergo certain tests and quality checks. Appropriate packaging and delivery are performed after this process. There are many stainless steel tube applications that are subsequently used.

Leave a Reply

Your email address will not be published. Required fields are marked *